Sony Ericsson K600i Disassembly & Screen Replacement These instructions are provided as information only; I am not a Sony Ericsson technician. Dis
Step 2: Remove Screws Use the T6 Torx screwdriver to remove the four screws indicated by the arrows. Step 3: Pry Housing ApartUsing your fingers, pry
Remove the back half of the camera's housing and set it aside. Step 4: Remove Phone GutsNow you'll need to extract the innards of the phone
Once you remove the housing, the phone will look like the photo below.There's no need to remove the keypad buttons for screen removal, but I did
screwdriver as shown in the images below.
Once you have lifted up the screen, you'll see the LCD display connector. Mine was covered with a small piece of yellow tape. Remove the tape usi
This is what your phone will look like when you have removed the screen.
Step 6: Install New ScreenCarefully slip the flat cable from your new screen into the phone's display connector until the small flanges on the fl
Step 7: Reassemble the PhoneReassembly is simply a matter of reversing the steps for disassembly. Here's a couple of helpful hints when putting
Comentarios a estos manuales